• Click on the Apple Menu, then Click on Control Panels.
• Double Click
  on Remote Access.
• Put a Dot by
  Registered User.
• Unless the arrow in the upper left corner of the window is already pointing down, Click on it.
  
• In the field labelled Name, type in Your dialup username.
• In the field
  labelled Password, Type in Your dialup password.
• In the field
  labelled Number, Type in your dial-up number 0845 1121324 (or 1121074)
• Make sure Save password is checked.

  
  

• Click Options.
  
• Click on the tab labelled Redialing.
  
• Select Redial main number only in the drop-down box labelled Redial.
  
• In the field labelled Redial: x times, Type in 10.
• In the field
  labelled Time between retries: x seconds, Type in 5.

  

• Click on the
  tab labelled Connection.
  
• Make sure only Flash icon in menu bar while connected and Disconnect if idle for 10 minutes are checked.

  

• Click on the tab labelled Protocol.
• In the drop down box labelled Use protocol, Select PPP.
  
• Make sure only Connect automatically when starting TCP/IP applications, Allow error
  compression and correction in modem, and Use TCP header compression are checked.

  

• Click OK.
  
• Exit Remote Access.
  
• When prompted to save changes, Click Save.
• Close Control Panels.
  

MAC TCP/IP

• Click on the
  Apple Menu, then Click on Control Panels.
• Double Click on TCP/IP.
• In the drop down box labelled Connect via, Select PPP.
  
• In the drop down box labelled Configure, Select Using PPP Server.
  
• In the field labelled Name server address, type in 195.74.96.34 press Return, then type in 195.74.96.35
  
• In the field labelled Additional Search domains, type in swiftserve.net
  
• All other fields should be left blank.

  

• Click Options.
  
• Put a Dot by Active.
• Make sure Load only when needed is Checked.
  
• Click OK.
• Exit TCP/IP.
  
• When prompted to save changes, Click Save.
• Close Control Panels.